With only around three months left until the EU Battery Passport becomes mandatory on 18 February 2027, the focus for companies is shifting to practical implementation: translating the regulatory requirements into concrete processes and putting the necessary foundations in place. From the effective date, batteries for electric vehicles (EVs), batteries for light means of transport (LMT) and industrial batteries with a capacity greater than 2 kWh that are placed on the EU market or put into service must have a digital battery passport.
At the same time, the regulatory requirements are continuing to take shape. Recent European Commission guidance and technical recommendations bring more clarity, including the Joint Research Centre’s recommendations on the future methodology for calculating and verifying recycled content under Article 8. Some delegated and implementing acts, however, are still being finalised.
The battery passport is far more than just a reporting tool. It makes key information about a battery digitally accessible and is part of a broader regulatory framework addressing sustainability, safety, performance, labelling and circularity across a battery’s entire life cycle.
In an earlier blog article (EU Battery Regulation: guide to calculating the carbon footprint), we looked at what is required to calculate the carbon footprint under the EU Battery Regulation. But the carbon footprint calculation and declaration, which have their own application dates, are only one part of the broader compliance challenge. Companies also need an integrated system to collect, verify, maintain and selectively share the additional data required under the EU Battery Regulation and for the battery passport.
When the QR code is scanned, the unique identifier retrieves the corresponding passport record. The battery passport operates through a decentralised system, with the detailed battery information maintained by the responsible economic operator or by an operator acting under its written authorisation.
What users can see depends on their access rights. Some information is publicly accessible, while other information is reserved exclusively for notified bodies, market surveillance authorities and the European Commission. Access for repairers, remanufacturers, second-life operators, recyclers and other persons with a legitimate interest will be set out in the forthcoming implementing act under Article 77(9).
The responsible economic operator must ensure that the information is accurate, complete and up to date throughout the relevant life cycle stages, and that the passport remains accessible in line with the applicable access rights and technical requirements.
|
User group |
Typical information needs |
Practical benefit |
|
Consumers and purchasers |
Identity, capacity and basic product information, plus relevant sustainability information such as carbon footprint and recycled content |
Better-informed product comparisons and purchasing decisions |
|
Authorities and notified bodies |
Relevant conformity information, verified declarations and traceability data |
More efficient market surveillance and enforcement |
|
Repairers and second-life operators |
State of health, performance, safety and relevant dismantling information |
Better assessment of residual value and suitability for further use |
|
Recyclers and waste operators |
Chemical composition, hazardous substances, material composition and dismantling guidance |
Safer handling and more efficient recovery of valuable materials |
Which data points are required depends on the specific battery category, its technical relevance and the date from which the underlying requirement applies. Carbon footprint, recycled content and due diligence information will therefore not necessarily be required in every battery passport from February 2027. Access to non-public information also depends on the applicable access rules and on the legitimate interest of the respective user group.
|
Provision |
Key requirement |
Mainly affected batteries / operators |
Significance |
|
Article 6 |
Compliance with applicable restrictions on hazardous and problematic substances |
All battery categories |
Protects health and the environment and supports safe, high-quality recycling |
|
Article 7 |
Plant- and model-specific carbon footprint declaration, followed by performance classes and maximum thresholds |
EV batteries, LMT batteries and rechargeable industrial batteries with a capacity greater than 2 kWh |
Turns life cycle emissions into a verifiable market parameter |
|
Article 8 |
Documentation of the recycled content of cobalt, lead, lithium and nickel, followed by mandatory minimum shares according to the applicable battery category and implementation date |
Industrial batteries (>2 kWh), EV batteries and starting, lighting and ignition (SLI) batteries; LMT batteries at a later stage |
Promotes the use of secondary raw materials and calls for robust recycled content data |
|
Articles 9–10 |
Documented electrochemical performance and durability, with minimum values introduced progressively where applicable |
General-purpose portable batteries; rechargeable industrial batteries (>2 kWh), LMT batteries and EV batteries, depending on the specific requirement |
Links sustainability to service life, efficiency and resource productivity |
|
Article 12 |
Safety testing, hazard assessment and risk mitigation instructions for stationary battery energy storage systems |
Stationary battery energy storage systems |
Addresses fire, explosion and other safety risks, including those arising after repurposing or remanufacturing |
|
Chapter III |
Labels, separate collection symbols, QR codes, and information on state of health and expected lifetime |
Requirements vary by battery category |
Makes compliance and life cycle information accessible to users and downstream operators |
Not all of these requirements apply from the same date. Article 8 in particular distinguishes between documentation obligations and mandatory minimum shares of recycled content, with different timelines for the battery categories concerned.
The battery passport consolidates information derived from various requirements of the EU Battery Regulation. It provides digital access to the relevant information but does not replace the underlying calculations and assessments, the technical documentation or the required conformity assessment procedures.
Article 77 and Annex XIII of Regulation (EU) 2023/1542 specify which information must be provided in the battery passport for EV batteries, LMT batteries and industrial batteries with a capacity greater than 2 kWh. This includes product, sustainability, performance, and life-cycle information. The specific information required, however, depends on the battery category, its technical relevance and the date from which the underlying requirement applies.
All of this information is linked to the battery via a single QR code, while access depends on the user’s role and legitimate need for the information.
Responsibilities depend on how the finished battery is manufactured and placed on the EU market. The following overview summarises the key roles and responsibilities.
This is directly supported by Annex VIII of the Battery Regulation. Where relevant to the battery category and requirement, the technical documentation must include the applicable design calculations and examinations, documentary evidence, the studies underpinning the carbon footprint values under Article 7 and the recycled content rate under Article 8, as well as the relevant test reports.
In addition, the regulation explicitly lists inspection reports, calculation, measurement and test data, calibration data and qualification records as part of the quality documentation.
Implementing the battery passport is therefore first and foremost an exercise in structured data governance and regulatory compliance. The digital interface should be the final layer, not the starting point.
The EU Battery Regulation requires Member States to lay down effective and proportionate and dissuasive penalties. Specific fines and enforcement measures are determined under the applicable national law.
Market surveillance authorities may require companies to take corrective action. If identified deficiencies are not remedied within the specified period, they may restrict or prohibit the placing on the market of non-compliant batteries and order their withdrawal or recall.
Beyond these direct regulatory consequences, non-compliance can also have economic implications: it can damage a company’s reputation, strain business relationships across the supply chain and restrict access to customers who expect their suppliers to demonstrate compliance with regulatory requirements and an appropriate level of regulatory readiness.
Companies should not wait until every remaining technical detail has been finalised. Battery classification, data mapping, governance structures, supplier requirements and documentation processes can already be prepared and put in place on the basis of the EU Battery Regulation and the currently available guidelines.
The first step is to determine which batteries fall within the scope of the regulation, which data is required from February 2027 and which additional fields will apply at a later date. This lays the groundwork for a battery passport system that meets the initial requirements while remaining adaptable to future data and access requirements.
EurA supports companies in assessing the requirements of the EU Battery Regulation that are relevant to them, structuring their product and sustainability data and developing a practical implementation pathway for the EU Battery Passport.
➔ Would you like to explore what the applicable requirements mean for your battery portfolio and how your company can best respond to them? EurA’s corporate sustainability team will be happy to support you with the next steps.
Sources and further information: